billing:nas_access_server:linuxisg

Настройка Linux ISG в связке с MikBiLL

Для начала установите Linux ISG

Описание

Начиная с версии 2.0.6 MikBiLl полностью поддерживает данный тип NAS.

Сама система Linux ISG представляет из себя весьма хороший софт для обеспечения достпа типа IPoE/IPNet Так же демонстрирует Весьма высокий HiLoad Пример:

  • core i7
  • 2x dual 1G intel cards ( 2 гигабита трафика)
  • NAT
  • шейпер
  • 4к онлайн абонентов
  • все это на одной машине

Linux ISG в работе с MikBiLL необходимо настроить только как указано ниже и никак иначе. Вы настраиваете все 4 указанных сервиса. Интернет будет шейпаться. Так же отключатся или включатся по необходимости

Абонентам в случае отключения интернета будет показывать "страницу без денег" используется сервис типа Tagger(Linux ISG), без него настроить не удастся.

Так же абонент даже в случае отключенного интернета будет показываться в онлайн, это особенности работы данной системы.

Настройка NAS

nolink& |

Системные опции

В системных опциях указываем имена сервисов (рекомендуем как в примере)

nolink& |

Пример действующего конфига

содержимое

cat /opt/ISG/etc/tc.conf
## Traffic classes EXAMPLE for lISG
## Format: Class name   IPv4 prefix (subnet)

#RFC1918                10.0.0.0/8
#RFC1918                192.168.0.0/16
#RFC1918                172.16.0.0/12

LOCAL   192.168.0.0/16

PEER            10.0.2.0/30

#L4REDIR                172.22.0.0/24

# All other traffic EXCEPT for RFC1918, OUR_LOCAL, PEERING and SPECIFIC classes
# falls here. PLEASE NOTE THIS! All OTHER traffic, NOT JUST ALL traffic!
INET    0.0.0.0/0

содержимое

cat /opt/ISG/etc/config.pl
#!/usr/bin/perl -w

### Detach from console after successful start
$cfg{daemonize} = 1;

### Log to syslog using this facility
$cfg{log_facility} = "local7";

### RADIUS-related settings

### You can specify as many as you want RADIUS servers. If server with lower index
### is not answering, server with next index will be tried (0, 1, 2, etc...).
$cfg{radius_auth}{0} = { server => "192.168.0.1:1812", timeout => 100, secret => "secret" };
$cfg{radius_acct}{0} = { server => "192.168.0.1:1813", timeout => 100, secret => "secret" };

$cfg{nas_identifier} = "LinuxISG"; ## By default equals to NAS IP-address

### CoA-related settings
$cfg{coa_server} = "192.168.0.1";  ## Accept requests only from this IP (comment to accept from all)
$cfg{coa_secret} = "secret";     ## Shared secret
$cfg{coa_port} = 3799;           ## Local UDP port to listen for CoA requests

### Send Interim-Update to RADIUS server every session_alive_interval seconds
$cfg{session_alive_interval} = 300; ## Every minute (0 = don't send)

### Session inactivity default timeout (disconnect session after this time) (in seconds)
$cfg{session_idle_timeout} = 1800;

### Session default maximum duration (end session after this time) (in seconds)
$cfg{session_max_duration} = 86400;

### Unauth session maximum duration (end session after this time) (in seconds)
$cfg{unauth_session_max_duration} = 60;

### This services will be automatically applied if session was rejected by RADIUS
#$cfg{unauth_service_name_list} = [ "ATESTSERV", "AREDIRECT" ];

### Check traffic classification file MD5 sum every N seconds. If sum was changed re-read this file.
$cfg{tc_check_interval} = 300; ## Every 5 minutes

####################### Services description #######################
$cfg{srv}{"INET"}{type} = "policer";
$cfg{srv}{"INET"}{traffic_classes} = [ "INET" ];
$cfg{srv}{"LOCAL"}{traffic_classes} = [ "LOCAL" ];
$cfg{srv}{"PEER"}{traffic_classes} = [ "PEER" ];
$cfg{srv}{"L4REDIR"}{type} = "tagger";
$cfg{srv}{"L4REDIR"}{traffic_classes} = [ "INET" ];

#################### End services description ######################

###
### It's better not to touch anything below this line
###
$cfg{debug} = 1;
$cfg{pid_file} = "/var/run/ISGd.pid";
$cfg{radius_dictionary} = $FindBin::RealBin . "/../etc/raddb/dictionary";
$cfg{tc_file} = $FindBin::RealBin . "/../etc/tc.conf"
root@ISG:/opt/ISG/bin# iptables -L -n
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
ISG        all  --  192.168.55.0/24      0.0.0.0/0           ISG initiator src mode
ISG        all  --  0.0.0.0/0            192.168.55.0/24     ISG

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
root@ISG:/opt/ISG/bin# iptables -L -n -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination
DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0            tcp dpt:80ISG match service L4REDIR  to:192.168.0.1

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination
  • billing/nas_access_server/linuxisg.txt
  • Последнее изменение: 11 лет назад
  • ld